DIY Draft Stopper
Sunday, January 22, 2012 at 10:42AM
Lisa in Crafts, Home, Home Decor, Sewing

There are many things that I love about living in a house that is over a hundred years old, but drafts aren't one of them. With winter here I thought that making a draft stopper for my front door would help keep a bit of the chill out of the house.

To start I used my rotary cutter to trim some fabric to 9" wide and a few inches wider than my door frame. I used outdoor fabric because I wanted something durable and I chose a subtle pattern that I thought would be fun but not too distracting in my entryway.

I folded the fabric lengthwise with right sides together and then sewed it shut, leaving a small opening at the top. I clipped the salvage at the corners, pressed open the seams and, pulling the stopper through the opening, turned it right side out. 

I chose a fine grain kitty litter to fill my draft stopper since it is heavy, compact, and inexpensive. To fill it I made a funnel with a piece of cardstock and poured the kitty litter into the stopper. I made a bit of a mess and I think if I did this again I would decant the kitty litter into something smaller, like a pitcher, to pour it into the stopper.

After filling up the draft stopper as much as I could I used a blind stitch to close up the opening and then placed it under my front door. Now my entryway is a little bit cozier.

P.S. If you are curious, the item hanging from my door knob is a wooden cow bell that I bought in Cambodia this past summer. I love the sound it makes when I open and close my front door.

Article originally appeared on homeandawaywithlisa (http://homeandawaywithlisa.com/).
See website for complete article licensing information.